AppleWin v1.30.14.0 is released. AppleWin (also known as Apple //e Emulator for Windows) is an open source software emulator for running Apple II programs in Microsoft Windows. AppleWin has support for most programs that could run either on the Apple II+ or the Apple IIe. By default, AppleWin emulates the Extended Keyboard IIe (better known as the Platinum IIe) with built-in 80-column text support, 128 kilobytes of RAM, two 5.25-inch floppy disk drives, a joystick, a serial card and 65C02 CPU. AppleWin supports lo-res, hi-res, and double hi-res graphics modes and can emulate both color and monochrome Apple II monitors; later versions of AppleWin also can emulate a television set used as a monitor. Both 40-column and 80-column text is supported.

AppleWin can emulate the Apple II joystick (using the PC's default controller), paddle controllers (using the computer mouse), and can also emulate the Apple II joystick using the PC keyboard. AppleWin can also use the PC speaker to emulate the Apple II's sound if no sound card is available (does not work under NT-based Windows versions). Full screen mode is available through the use of DirectX. Features added to the latest versions of AppleWin include Ethernet support using Uthernet, Mockingboard and Phasor sound card support, SSI263 speech synthesis, hard drive disk images and save states.

AppleWin Changelog:
[Change #1080] Support Mockingboard and Mouse at same time. (Improvement for: "Witch Trial".)
[Change #1187] New command line: '-capslock=off' to start up with Caps Lock off.
[Change #1183] Phasor: add support for Echo+ mode (eg. 6522 PortA chip select for the AYs, dual-mono sound output & reading AY regs).
[Change #1190] Document command line: '-multimon'.
At start-up, use the Registry's saved "Window x/y position" to position the AppleWin window correctly for multiple monitors.
[Change #1033] New command line support for hard disk controller in slots 5 and 7.
Use '-s5 hdc' or '-s7 hdc' to start up with a hard disk controller (hdc) in slots 5 and 7 respectively.
Use '-s5h1 ' and '-s5h2 ' to connect hard disk images.
NB. There's no GUI configuration support for the hdc in slot 5.
NB. An hdc in slot 5 allows these 3.5" titles to work: "Perplexing Puzzles" and "Dark Heart of Uukrul".
[Bug #1193] Phasor: now can't read AY regs (via 6522 PortA) after AY set to INACTIVE function. (Mockingboard still can.)
[Bug #1192] Phasor: support the GAL logic for AY chip select & AY PSG Function.
[Bug #1188] Alt+Enter: fix regression, as this key combo should default to toggling full screen.
[Bug #1175, #1176] Mockingboard: fix some edge cases.
[Bug #1164] Debugger: Fix 'bpv' & 'tf' commands to trigger for non-visible scan lines when in full-speed.
[Bug #1163] Debugger: Fix disassembly when in middle of data.
[Bug #1099] Fix 6502/65C02: Clearing the D flag (or not) on a BRK or Interrupt or Reset.
[PR #1171] Refactor the Mockingboard & Phasor code.
Can now put any sound card (Mockingboard, Phasor or SAM) into either or both slots 4 and 5.
NB. Allows Mouse card in slot 4 and Mockingboard (or Phasor) in slot 5.
Change: Command line '-s empty' now works for slots 1-7 (just not slot 0).
Debugger: Improve mini-memory views for AY8913 chip registers: show reg. latch address in white.
Debugger: Fix 'zpc' command, which wasn't working.

Download: AppleWin v1.30.14.0
Source: Here