fpPS4 Git (2023/03/17)

fpPS4 Git (2023/03/17) is compiled. PS4 compatibility layer (emulator) on Free Pascal. This project is at the beginning and started for fun.

yuzu Git (2023/03/17)

yuzu Git (2023/03/17) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Ryujinx Git (2023/03/17)

Ryujinx Git (2023/03/17) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

rpcs3 Git (2023/03/17)

rpcs3 Git (2023/03/17) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2023/03/17)

PCSX2 Git (2023/03/17) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits.

Citra Git (2023/03/17)

Citra Git (2023/03/17) is compiled. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.

Vita3K Git (2023/03/17)

Vita3K Git (2023/03/17) is compiled. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.

PCSX-Redux Git (2023/03/17)

PCSX-Redux Git (2023/03/17) is compiled. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.

Snes9x Git (2023/03/17)

Snes9x Git (2023/03/17) is compiled. Snes9x is a portable, freeware Super Nintendo Entertainment System (SNES) emulator. It basically allows you to play most games designed for the SNES and Super Famicom Nintendo game systems on your PC or Workstation; which includes some real gems that were only ever released in Japan. Snes9x is the result of well over three years worth of part-time hacking, coding, recoding, debugging, divorce, etc. (just kidding about the divorce bit). Snes9x is coded in C++, with three assembler CPU emulation cores on the i386 Linux and Windows ports.

Flycast Git (2023/03/17)

Flycast Git (2023/03/17) is compiled. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.

NSFPlay Git (2023/03/17)

NSFPlay Git (2023/03/17) is compiled. NSFPlay is an NSF player for Windows and plugin for Winamp. It is a fork of the original program by Brezza, intended to provide support for more recent Windows operating systems, and improve its accuracy and utility.

N64 Git (2023/03/17)

N64 Git (2023/03/17) is compiled. Experimental low-level N64 emulator written in C and a bit of C++. Still under heavy development and not ready for prime time. Compatibility is not high and performance is not great (yet.) The goals of this project are to create a low-level emulator with good compatibility, while learning a lot along the way.

puNES Git (2023/03/17)

puNES Git (2023/03/17) is compiled. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

Project64 Git (2023/03/17)

Project64 Git (2023/03/17) is compiled. Project 64 is a proprietary Nintendo 64 emulator for Windows. It employs a plug-in system that allows third-party software developers to create their own implementation of a specified component. Project64 allows the user to play Nintendo 64 games on a computer by reading ROM images, either dumped from the read-only memory of a Nintendo 64 cartridge or created directly on the computer as homebrew. Project64 started as an exercise by Jabo and zilmar in an attempt to see if they were capable of programming a Nintendo 64 emulator. It's open source now.

Play! Git (2023/03/17)

Play! Git (2023/03/17) is compiled. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.

PPSSPP Git (2023/03/17)

PPSSPP Git (2023/03/17) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

Dolphin Git 5.0-18995

Dolphin Git 5.0-18995 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

SkyEmu Git (2023/03/17)

SkyEmu Git (2023/03/17) is released. SkyEmu is a low level GameBoy, GameBoy Color and Game Boy Advance emulator. Its primary focus is to provide a good user experience through a good mixture of tradeoffs of accuracy, performance, features and usability.

DuckStation Git (2023/03/17)

DuckStation Git (2023/03/17) is compiled. Fast-ish PlayStation 1 emulator for PC and Android.

FB Neo Git (2023/03/17)

FB Neo Git (2023/03/17) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

Stella Git (2023/03/17)

Stella Git (2023/03/17) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

OpenMSX Git (2023/03/17)

OpenMSX Git (2023/03/17) is compiled. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.

mGBA Git (2023/03/17)

mGBA Git (2023/03/17) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.

GearSystem Git (2023/03/17)

GearSystem Git (2023/03/17) is complied. GearSystem is a Sega Master System / Game Gear emulator written in C++ that runs on iOS, Raspberry Pi, Mac, Windows and Linux. The main focus of this emulator is readability of source code with very high compatibility.

Gearcoleco Git (2023/03/17)

Gearcoleco Git (2023/03/17) is complied. Gearcoleco is a very accurate cross-platform ColecoVision emulator written in C++ that runs on Windows, macOS, Linux, BSD, Raspberry Pi and RetroArch. This is an open source project with its ongoing development made possible thanks to the support by these awesome backers.

Gearboy Git (2023/03/17)

Gearboy Git (2023/03/17) is compiled. Gearboy is a Nintendo Game Boy emulator written in C++. The emulator is focused on readability of source code, but nevertheless it has good compatibility. A lot of effort has gone into this in order to follow OOP and keep it as simple as possible.

Fceux Git (2023/03/17)

Fceux Git (2023/03/17) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

DOSBox-Staging Git (2023/03/17)

DOSBox-Staging Git (2023/03/17) is compiled. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.

DOSBox SVN r4482

DOSBox SVN r4482 is compiled. DOSBox emulates an Intel x86 PC, complete with sound, graphics, mouse, joystick, modem, etc., necessary for running many old MS-DOS games that simply cannot be run on modern PCs and operating systems, such as Microsoft Windows XP, Windows Vista, Linux and FreeBSD. However, it is not restricted to running only games. In theory, any MS-DOS or PC-DOS (referred to commonly as "DOS") application should run in DOSBox, but the emphasis has been on getting DOS games to run smoothly, which means that communication, networking and printer support are still in early development.

Ares Git (2023/03/17)

Ares Git (2023/03/17) is compiled. ares is a multi-system emulator that began development on October 14th, 2004. It is a descendent of higan and bsnes, and focuses on accuracy and preservation.

ES-DE v2.0.0

EmulationStation Desktop Edition (ES-DE) v2.0.0 is released. EmulationStation Desktop Edition (ES-DE) is a frontend application for browsing and launching games from your multi-platform game collection. It comes preconfigured for use with RetroArch and a number of other emulators. It's also fully customizable so you can easily expand it to launch any emulators or applications that are not included in the bundled configuration. ES-DE is free and open source and will remain so forever. It's also true multi-platform and runs on numerous operating systems such as Ubuntu, Linux Mint, Manjaro, Fedora, FreeBSD, macOS and Windows.

Altirra v4.20 Test 7

Altirra v4.20 Test 7 is released. Altirra is an Atari 8 bit Emulator on the Windows/DOS platform. Altirra emulates several models of the 8-bit Atari computers. This includes the the 800, 800XL, and 130XE versions. It has a lot of options, and compatibility is decent especially given the emulator's early stages. It also supports some copy protected games properly in emulation.

Mame Classic v9.7.0

Mame Classic v9.7.0 is released. Mame Classic is the first Windows Front-End for M.A.M.E. to feature independent default settings for raster and vector games! Works with Windows 98, ME, 2000, XP, & Vista.

Firebird v1.6

Firebird v1.6 is released. Third-party multi-platform emulator of the ARM-based TI-Nspire™ calculators. This project is currently the community TI-Nspire emulator, originally created by Goplat. It supports the emulation of Touchpad, CX and CX CAS calcs on Android, iOS, Linux, Mac and Windows.

Playnite v10.11

Playnite v10.11 is released. Open source video game library manager and launcher with support for 3rd party libraries like Steam, GOG, Origin, Battle.net and Uplay. Including game emulation support, providing one unified interface for your games.

EightyOne v1.32

EightyOne v1.32 is released. EightyOne emulates the Sinclair ZX81, Sinclair ZX80, Sinclair ZX Spectrum 16k/48k, Sinclair ZX Spectrum 128k, Amstrad/Sinclair Spectrum +2, Amstrad/Sinclair Spectrum +2a, Amstrad/Sinclair Spectrum +3, Timex TS1000, Timex TS1500, Timex TS2068, Timex TC2048, Lambda 8300, Ringo R470, MicroDigital TK85 and Jupiter ACE.

Gopher2600 v0.21.0

Gopher2600 v0.21.0 is released. Gopher2600 is an emulator for the Atari 2600. Whilst the performance is not as efficient as some other emulators it is none-the-less suitable for playing games, on a reasonably modern computer, at the required 60fps. (The development machine for Gopher2600 has been an i3-3225, dating from around 2012.)

DREAMM v2.0

DREAMM v2.0 is released. DREAMM(DOS Retro-Emulation Arena for Maniac Mansion) is a way to play your original DOS LucasArts adventure games with full fidelity to the original, without the hassle of setting up a general-purpose emulator. It was created by Aaron Giles.

ZXSP v0.8.33 beta

ZXSP v0.8.33 beta is released. zxsp is a simulator for the historic Sinclair ZX home computer families for Mac OS X. zxsp simulates the black&white models ZX80 and ZX81, the Jupiter Ace, the ZX Spectrum models with 16K and 48K ram, the Spanish clone from Inves, the +128, +2, and the +2A/+2B including the Spanish and French localised versions.

Z64K (2023/03/13)

Z64K (2023/03/13) is released. Pixel exact emulation of the Commodore 64, VIC 20 and Atari 2600 written entirely in Java. The emulators should run on any platform with an updated java runtime environment installed.

Rebuilder v0.04

Rebuilder v0.04 is released. Rebuilder is a small commandline tool which has some advantages over the rebuilder in clrmamepro. Faster, Standalone merge mode, CHD rebuild to name a few.

MAME v0.252 for Slackware

MAME v0.252 for Slackware is released. These are MAME (and tools) packages for Slackware Linux (32-bit and 64-bit editions). MAME stands for Multiple Arcade Machine Emulator.

KEGS v1.19

KEGS v1.19 is released. Kegs is An Apple IIgs emulator for Mac OS X, Linux, and Unix/X11.

DosPanel v1.6.2

DosPanel v1.6.2 is released. The program DosPanel is a graphical user interface for DOSBox. The user can make all required settings needed to start DOS applications in DOSBox without concern the somewhat crude syntax of the configuration file. Each DOS application can have its individual settings stored by the program.

Cemu v2.0-29

Cemu v2.0-29 is released. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC. It's written in C/C++ and is being actively developed with new features and fixes to increase compatibility, convenience and usability.

WinUAE v4.10.2 Beta 2

WinUAE v4.10.2 Beta 2 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

AppleWin v1.30.14.1

AppleWin v1.30.14.1 is released. AppleWin (also known as Apple //e Emulator for Windows) is an open source software emulator for running Apple II programs in Microsoft Windows. AppleWin has support for most programs that could run either on the Apple II+ or the Apple IIe. By default, AppleWin emulates the Extended Keyboard IIe (better known as the Platinum IIe) with built-in 80-column text support, 128 kilobytes of RAM, two 5.25-inch floppy disk drives, a joystick, a serial card and 65C02 CPU.

RetroArch v1.15.0

RetroArch v1.15.0 is released. RetroArch is a multi-system emulator for Linux, Windows, Mac OS X and *BSD. It is formerly known as SSNES. Its design and background is quite different than most other emulators as RetroArch does not implement an emulation core itself. RetroArch talks to libretro, a generic emulator core API. This means that RetroArch is core agnostic, and it does not care which emulator core is running.

NitroSwan v0.5.1

NitroSwan v0.5.1 is released. This is a Bandai WonderSwan (Color/Crystal) & PocketChallenge V2 emulator for the Nintendo DS.

GameEx v18.37

GameEx v18.37 is released. GameEx is a graphical DirectX based front-end for MAME, Zinc, Daphne, PC Games, and all command line based game emulators, along with being a good Home Theatre PC solution. It also makes a good CarPC and touchscreen frontend. The original goal was for it to be used on Windows XP Media Center and Arcade Cabinets although it will run on any version of Windows 98, ME, 2000, XP and Vista. For just $17 (USD) you can too unlock the full potential of the front end.

Flycast Dojo v0.5.23

Flycast Dojo v0.5.23 is released. Flycast Dojo is a fork of Flycast, a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from Reicast, with a focus on netplay features and replay. We intend to keep Flycast Dojo updated with the latest downstream changes made to the parent project. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.

touchHLE v0.1.2

touchHLE v0.1.2 is released. touchHLE is a high-level emulator (HLE) for iPhone OS apps. It runs on modern desktop operating systems, and is written in Rust.As an HLE, touchHLE is radically different from a low-level emulator (LLE) like QEMU. The only code the emulated CPU executes is the app binary and a handful of libraries; touchHLE takes the place of iPhone OS and provides its own implementations of the system frameworks (Foundation, UIKit, OpenGL ES, OpenAL, etc).

HBMAME v0.245.10

HBMAME v0.245.11 is released. HBMAME (HomeBrew MAME) is a derivate of MAME, and contains various hacks and homebrews that are not included in MAME. It is based on the latest MAME source from SVN at the time of release.

DSP Emulator v0.21Final (2023/03/14)

DSP Emulator v0.21Final (2023/03/14) is released. DSP Emulator is a new version of the ZX SPECTRUM +3, ZX Spectrum 128, ZX Spectrum 48, Arcade, Amstrad CPC 464, NES and Game Boy emulator.

WinVICE r43513

WinVICE r43513 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

Supermodel Git (2023/03/15)

Supermodel Git (2023/03/15) is released. Supermodel emulates Sega's Model 3 arcade platform, allowing you to relive state-of-the-art 3D arcade gaming as it existed from 1996 through 1999. It uses OpenGL, SDL2, and can run on Windows, Linux, and macOS. It also supports network play on low-latency network connections. The source code is freely available under the terms of the GNU General Public License.

BizHawk v2.9 rc3

BizHawk v2.9 rc3 is released. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Cxbx Reloaded (2023/03/17)

Cxbx Reloaded (2023/03/17) is released. Cxbx-Reloaded is an emulator for running Microsoft Xbox (and eventually, Chihiro) games on Microsoft Windows. The project began life as a fork of Cxbx with added 64-bit support. Work is currently underway to backport some of the improvements from Dxbx. Cxbx-Reloaded is still pretty unstable, don't expect it to run much at this point.