yuzu Git (2022/08/15)

yuzu Git (2022/08/15) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Ryujinx Git (2022/08/15)

Ryujinx Git (2022/08/15) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

rpcs3 Git (2022/08/15)

rpcs3 Git (2022/08/15) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2022/08/15)

PCSX2 Git (2022/08/15) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits.

Citra Git (2022/08/15)

Citra Git (2022/08/15) is compiled. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.

PCSX-Redux Git (2022/08/15)

PCSX-Redux Git (2022/08/15) is compiled. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.

PPSSPP Git (2022/08/15)

PPSSPP Git (2022/08/15) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

Dolphin Git 5.0-17197

Dolphin Git 5.0-17197 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

DuckStation Git (2022/08/15)

DuckStation Git (2022/08/15) is compiled. Fast-ish PlayStation 1 emulator for PC and Android.

FB Neo Git (2022/08/15)

FB Neo Git (2022/08/15) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

Stella Git (2022/08/15)

Stella Git (2022/08/15) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

NanoBoyAdvance Git (2022/08/15)

NanoBoyAdvance Git (2022/08/15) is compiled. NanoboyAdvance is a Nintendo Game Boy Advance (TM) emulator written in C++17. The goal is to create a minimal, accurate and reasonably efficient Game Boy Advance emulator in modern C++. The emulator implements the core hardware completely and with high accuracy. Almost all games can be emulated without any known issues, even the 'Classic NES' titles which abuse a variety of edge-cases and undefined behaviour.

N64 Git (2022/08/15)

N64 Git (2022/08/15) is compiled. Experimental low-level N64 emulator written in C and a bit of C++. Still under heavy development and not ready for prime time. Compatibility is not high and performance is not great (yet.) The goals of this project are to create a low-level emulator with good compatibility, while learning a lot along the way.

DOSBox-Staging Git (2022/08/15)

DOSBox-Staging Git (2022/08/15) is compiled. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.

BizHawk Git (2022/08/15)

BizHawk Git (2022/08/15) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Ares Git (2022/08/15)

Ares Git (2022/08/15) is compiled. ares is a multi-system emulator that began development on October 14th, 2004. It is a descendent of higan and bsnes, and focuses on accuracy and preservation.

Emma 02 v1.47.1

Emma 02 v1.47.1 is released. Emma 02 is an emulator for the relatively unknown COMX-35 computers from the early 80s. Emma 02 runs on Windows XP, Vista and Windows 7.

Free42 v3.0.14

Free42 v3.0.14 is released. Free42 is a complete re-implementation of the HP-42S scientific programmable RPN calculator,was made from 1988 until 1995 by Hewlett-Packard and the HP-82240 printer. Free42 was written from scratch, without using any HP code. You do not need any ROM images in order to use it, yet it is fully HP-42S compatible.

ClrMamePro v4.046

ClrMamePro v4.046 is released. ClrMamePro is a so-called ROM-manager. With every new release of MAME a lot has been changed. New gamesets have been added, some have been removed, etc.

vAmiga v2.1

vAmiga v2.1 is released. vAmiga emulates a Commodore Amiga 500, 1000 or 2000 on your Mac. To run the emulator, a Kickstart Rom is required. The original Amiga Roms are the intellectual property of the company Cloanto. By purchasing a license of Amiga Forever™ you can acquire a legal Kickstart license. Rom image files can be added to vAmiga via drag and drop. vAmiga is open-source and published under the terms of the GNU General Public License.

CPCEMU v2.5

CPCEMU v2.5 is released.CPCEMU is the project to imitate an Amstrad CPC 464, 664 or 6128 on a PC.Having its roots back in 1992 there were well-working DOS-based versions in the following years. You may read CPCEMU - The Story to find out how and why this happened.Now CPCEMU has been ported to Linux and Windows so you can enjoy it on (nearly) all major platforms! You will find further information under CPCEMU News.CPC Documentation is the complete manual for CPCEMU in HTML form, in 4 languages!In case you are interested in software for the CPC you can rummage in CPCEMU Software.

BletchMAME v2.16

BletchMAME v2.16 is released. BletchMAME is a new experimental front end for MAME. Unlike existing front ends (which function as launchers, keeping MAME's internal UI), BletchMAME replaces the internal MAME UI with a more conventional point and click GUI to provide a friendlier experience in a number of areas (such as profiles, input configuration and a number of others). While BletchMAME is intended to support all machines supported by MAME, it should be particularly suitable to computer emulation.

WinArcadia & AmiArcadia v29.1

WinArcadia & AmiArcadia v29.1 are released. AmiArcadia and WinArcadia are multi-emulators of these Signetics-based machines: Emerson Arcadia 2001 console family (Bandai, Emerson, Grandstand, Intervision, Leisure-Vision, Leonardo, MPT-03, Ormatu, Palladium, Poppy, Robdajet, Tele-Fever, Tempest, Tryom, Tunix, etc.) (1982);Interton VC 4000 console family (Acetronic, Fountain, Interton, Prinztronic, Radofin, Rowtron, Voltmace, Waddington, etc.) (c. 1978);Elektor TV Games Computer (1979); PIPBUG-based machines (Electronics Australia 77up2 and 78up5, Signetics Adaptable Board Computer, Eurocard 2650, etc.) (c. 1977-1978);Signetics Instructor 50 trainer (1978);Central Data 2650 computer (1977);Malzak 1 and 2 coin-ops by Kitronix (c. 1980) (preliminary); and Galaxia and Astro Wars coin-ops by Zaccaria (1979-1980) (preliminary).

Ludo v0.16.18

Ludo v0.16.18 is released. Ludo is a work in progress libretro frontend written in go. It works on OSX, Linux, Linux ARM and Windows. libretro is an API designed mainly for games and emulators.

WinVICE r42510

WinVICE r42510 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

Supermodel Git (2022/08/14)

Supermodel Git (2022/08/14) is released. Supermodel emulates Sega's Model 3 arcade platform, allowing you to relive state-of-the-art 3D arcade gaming as it existed from 1996 through 1999. It uses OpenGL, SDL2, and can run on Windows, Linux, and macOS. It also supports network play on low-latency network connections. The source code is freely available under the terms of the GNU General Public License.