WinVICE r40760

WinVICE r40760 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

yuzu Git (2021/09/19)

yuzu Git (2021/09/19) is compiled. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Ryujinx Git (2021/09/19)

Ryujinx Git (2021/09/19) is compiled. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.

rpcs3 Git (2021/09/19)

rpcs3 Git (2021/09/19) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

PCSX2 Git (2021/09/19)

PCSX2 Git (2021/09/19) is compiled. PCSX2 is a free and open-source PlayStation 2 (PS2) emulator. Its purpose is to emulate the PS2's hardware, using a combination of MIPS CPU Interpreters, Recompilers and a Virtual Machine which manages hardware states and PS2 system memory. This allows you to play PS2 games on your PC, with many additional features and benefits. The PCSX2 project has been running for more than ten years. Past versions could only run a few public domain game demos, but newer versions can run most games at full speed, including popular titles such as Final Fantasy X and Devil May Cry 3.

melonDS Git (2021/09/19)

melonDS Git (2021/09/19) is compiled. melonDS is an open source Nintendo DS(NDS) emulator. melonDS is part of a second wave of DS emulators. There are a few other emulator projects that are part of it, which you might have already heard of. Either way, check them out!

DeSmuME Git (2021/09/19)

DeSmuME Git (2021/09/19) is compiled. DeSmuME is an open source Nintendo DS(NDS) emulator for Linux, Mac OS and Windows. DeSmuME supports save states, the ability to increase the size of the screen and it supports filters to improve image quality. DeSmuME also supports microphone use on Windows and Linux ports, as well as direct video and audio recording. The emulator also features a built-in movie recorder.

PCSX-Redux Git (2021/09/19)

PCSX-Redux Git (2021/09/19) is compiled. This is yet another fork of the Playstation Emulator, PCSX. While the work here is very much in progress, the goal is roughly the following: Bring the codebase to more up to date code standards. Get rid of the plugin system and create a single monolithic codebase that handles all aspects of the playstation emulation. Write everything on top of SDL/OpenGL3+/ImGui for portability and readability. Improve the debugging experience. Improve the rendering experience.

Flycast Git (2021/09/19)

Flycast Git (2021/09/19) is compiled. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.

Fceux Git (2021/09/19)

Fceux Git (2021/09/19) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

Play! Git (2021/09/19)

Play! Git (2021/09/19) is compiled. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.

Dolphin Git 5.0-15189

Dolphin Git 5.0-15189 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

PPSSPP Git (2021/09/19)

PPSSPP Git (2021/09/19) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

AQZ Netplay Input Plugin Git (2021/09/19)

AQZ Netplay Input Plugin Git (2021/09/19) for Project64 is compiled. Netplay Input Plugin is a plugin for Project64. It is an input plugin that supports netplay.

BizHawk Git (2021/09/19)

BizHawk Git (2021/09/19) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Stella Git (2021/09/19)

Stella Git (2021/09/19) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

puNES Git (2021/09/19)

puNES Git (2021/09/19) is compiled. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.

FB Neo Git (2021/09/19)

FB Neo Git (2021/09/19) is compiled. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

EKA2L1 Git (2021/09/19)

EKA2L1 Git (2021/09/19) is compiled. EKA2L1 is a Experimental Symbian OS emulator, written in C++ 17. The emulator currently emulates Symbian OS's EKA2 behavior (with planned EKA1 support), and reimplement most of its critical app servers. It can already boot many EKA2's apps and games, with EKA1 being worked on at the moment.

DOSBox-Staging Git (2021/09/19)

DOSBox-Staging Git (2021/09/19) is compiled. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.

PC6001VX v3.8.1

PC6001VX v3.8.1 is released. PC6001VX emulates the NEC PC-6001 under Windows. PC6001VX is a fork of Yumitaro's PC6001V NEC PC-6001 emulator geared towards Linux & Unix like operating with the added bonus being compilable for Windows.

My Nes v7.9.7931.3259

My Nes v7.9.7931.3259 is released. My Nes is a portable open source NES/FAMICOM emulator written in C#. It's EXACT nes cycle emulator, very accurate and uses exact ppu scanline timing. My Nes compatibility is very high, and most of the games that supported run perfectly.

Cemu v1.25.4

Cemu v1.25.4 is released. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC.

SSF PreviewVer R27

SSF PreviewVer R27 is released. SSF is a Sega Saturn emulator for Windows systems using DirectX 9.0b. The current version claims near-complete implementation of the Sega Saturn hardware (not counting emulation bugs), and can emulate the Saturn based Sega Titan Video arcade hardware too. As with most emulators, CDs or disc images are not included and have to be owned separately. The BIOS is also not included; as of 0.07 Beta R3, games run without the BIOS however. The usage of BIOS files is optional but recommended for better compatibility, and needed for tasks such as management of the contents of the internal memory of the Sega Saturn, or setting the system clock.