yuzu Git (2020/12/19) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2020-12-19
yuzu Git (2020/12/19)
yuzu Git (2020/12/19) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2020/12/19)
Ryujinx Git (2020/12/19) is complied. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.
rpcs3 Git (2020/12/19)
rpcs3 Git (2020/12/19) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
PCSX2 Git (2020/12/19)
PCSX2 Git (2020/12/19) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.
Project64 Git (2020/12/19)
Project64 Git (2020/12/19) is compiled. Project 64 is a proprietary Nintendo 64 emulator for Windows. It employs a plug-in system that allows third-party software developers to create their own implementation of a specified component. Project64 allows the user to play Nintendo 64 games on a computer by reading ROM images, either dumped from the read-only memory of a Nintendo 64 cartridge or created directly on the computer as homebrew. Project64 started as an exercise by Jabo and zilmar in an attempt to see if they were capable of programming a Nintendo 64 emulator. It's open source now.
NooDS Git (2020/12/19)
NooDS Git (2020/12/19) is complied. A (hopefully!) speedy NDS emulator. NooDS is available for Linux, macOS, Windows, and the Nintendo Switch. Automatic builds are provided; to use them, you'll need to install wxWidgets on Linux or macOS, or the latest Visual C++ runtime library on Windows. NooDS doesn't provide high-level emulation of the BIOS yet. To actually run games, you'll need BIOS files, named "bios7.bin" and "bios9.bin", and a firmware file, named "firmware.bin", placed in the same directory as the executable. On the Switch, you'll also need to have a ROM file named "rom.nds" in the directory, because there's no file browser yet.
Flycast Git (2020/12/19)
Flycast Git (2020/12/19) is complied. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.
Fceux Git (2020/12/19)
Fceux Git (2020/12/19) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.
puNES Git (2020/12/19)
puNES Git (2020/12/19) is complied. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.
DuckStation Git (2020/12/19)
DuckStation Git (2020/12/19) is complied. Fast-ish PlayStation 1 emulator for PC and Android.
FB Neo Git (2020/12/19)
FB Neo Git (2020/12/19) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
OpenMSX Git (2020/12/19)
OpenMSX Git (2020/12/19) is complie. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.
Stella Git (2020/12/19)
Stella Git (2020/12/19) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!
mGBA Git (2020/12/19)
mGBA Git (2020/12/19) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.
DOSBox-Staging Git (2020/12/19)
DOSBox-Staging Git (2020/12/19) is released. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.
BizHawk Git (2020/12/19)
BizHawk Git (2020/12/19) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
Yape v1.1.8
Yape v1.1.8 is released. Yape is the best emulator of Commodore microcomputer family running on Windows and Unix. The emulator faithfully imitates the C-264 (alias Commodore Plus/4) model.
Common Source Code Project (2020/12/19)
Common Source Code Project (2020/12/19) is released. This is the common source code archive of my works:
Wine v6.0-rc3
Wine v6.0-rc3 is released. Wine is a project to allow a PC running a Unix-like operating system and the X Window System to run x86 programs for Microsoft Windows. Alternately, those wishing to port a Windows application to a Unix-like system can compile it against the Wine libraries.
EmuTos CVS (2020/12/18)
EmuTos CVS (2020/12/18) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
WinVICE SVN r39343
WinVICE SVN r39343 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).