yuzu Git (2020/08/04) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2020-08-04
yuzu Git (2020/08/04)
yuzu Git (2020/08/04) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2020/08/04)
Ryujinx Git (2020/08/04) is complied. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.
rpcs3 Git (2020/08/04)
rpcs3 Git (2020/08/04) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
PPSSPP Git (2020/08/04)
PPSSPP Git (2020/08/04) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
Dolwin Git (2020/08/04)
Dolwin Git (2020/08/04) is compiled. Dolwin is a Nintendo GameCube Emulator for Windows. Dolwin is an emulator of Nintendo Gamecube console. This platform is based on PowerPC-derivative processor, produced by IBM Corp. and codenamed Gekko. Dolwin mainly purposed to emulate homebrewn applications.
bsnes-plus Git (2020/08/04)
bsnes-plus Git (2020/08/04) is complied. bsnes-plus (or bsnes+) is a fork of bsnes (based on bsnes-classic) intended to introduce some new features and improvements, mostly aimed at debugging. bsnes is an emulator for the Super Famicom and SNES video game systems. The purpose of the emulator is a bit different from other emulators: it focuses on accuracy, debugging functionality, and clean code.
NooDS Git (2020/08/04)
NooDS Git (2020/08/04) is complied. A (hopefully!) speedy NDS emulator. NooDS is available for Linux, macOS, Windows, and the Nintendo Switch. Automatic builds are provided; to use them, you'll need to install wxWidgets on Linux or macOS, or the latest Visual C++ runtime library on Windows. NooDS doesn't provide high-level emulation of the BIOS yet. To actually run games, you'll need BIOS files, named "bios7.bin" and "bios9.bin", and a firmware file, named "firmware.bin", placed in the same directory as the executable. On the Switch, you'll also need to have a ROM file named "rom.nds" in the directory, because there's no file browser yet.
Fceux Git (2020/08/04)
Fceux Git (2020/08/04) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.
FB Neo Git (2020/08/04)
FB Neo Git (2020/08/04) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
DuckStation Git (2020/08/04)
DuckStation Git (2020/08/04) is complied. Fast-ish PlayStation 1 emulator for PC and Android.
DobieStation Git (2020/08/04)
DobieStation Git (2020/08/04) is compiled. A young PS2 emulator with plans for an optimized Android port, as well as a fast, accurate, and easy-to-use PC port. A large portion of the PS2's library can boot or get to menus. Some titles can even go in-game, including high-profile ones such as Final Fantasy X and Shadow of the Colossus. Not intended for general use.
AQZ Netplay Input Plugin Git (2020/08/04)
AQZ Netplay Input Plugin Git (2020/08/04) for Project64 is released. Netplay Input Plugin is a plugin for Project64. It is an input plugin that supports netplay.
BizHawk Git (2020/08/04)
BizHawk Git (2020/08/04) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
Stella Git (2020/08/04)
Stella Git (2020/08/04) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!
Windows95 v2.2.2
Windows95 v2.2.2 is released. Windows 95 in Electron. Runs on macOS, Linux, and Windows.
ClrMamePro v4.038
ClrMamePro v4.038 is released. ClrMamePro is a so-called ROM-manager. With every new release of MAME a lot has been changed. New gamesets have been added, some have been removed, etc.
My Nes v7.8.7520
My Nes v7.8.7520 is released. My Nes is a portable open source NES/FAMICOM emulator written in C#. It's EXACT nes cycle emulator, very accurate and uses exact ppu scanline timing. My Nes compatibility is very high, and most of the games that supported run perfectly.
WinVICE SVN r38294
WinVICE SVN r38294 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).
EmuTos CVS (2020/08/04)
EmuTos CVS (2020/08/04) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
Swiss r870
Swiss r870 is released. The swiss army knife of gamecube homebrew. Swiss aims to be the ultimate utility Gamecube homebrew application.
mGBA v0.8.3
mGBA v0.8.3 is released. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.