yuzu Git (2020/07/26) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2020-07-26
yuzu Git (2020/07/26)
yuzu Git (2020/07/26) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2020/07/26)
Ryujinx Git (2020/07/26) is complied. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.
rpcs3 Git (2020/07/26)
rpcs3 Git (2020/07/26) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
Vita3K Git (2020/07/26)
Vita3K Git (2020/07/26) is complied. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.
PCSX2 Git (2020/07/26)
PCSX2 Git (2020/07/26) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.
PPSSPP Git (2020/07/26)
PPSSPP Git (2020/07/26) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
NooDS Git (2020/07/26)
NooDS Git (2020/07/26) is complied. A (hopefully!) speedy NDS emulator. NooDS is available for Linux, macOS, Windows, and the Nintendo Switch. Automatic builds are provided; to use them, you'll need to install wxWidgets on Linux or macOS, or the latest Visual C++ runtime library on Windows. NooDS doesn't provide high-level emulation of the BIOS yet. To actually run games, you'll need BIOS files, named "bios7.bin" and "bios9.bin", and a firmware file, named "firmware.bin", placed in the same directory as the executable. On the Switch, you'll also need to have a ROM file named "rom.nds" in the directory, because there's no file browser yet.
melonDS Git (2020/07/26)
melonDS Git (2020/07/26) is complied. melonDS is an open source Nintendo DS(NDS) emulator. melonDS is part of a second wave of DS emulators. There are a few other emulator projects that are part of it, which you might have already heard of. Either way, check them out!
ares v115
ares v115 is released. ares is a multi-system emulator that began development on October 14th, 2004. It is a descendent of higan and bsnes, and focuses on accuracy and preservation.
DobieStation Git (2020/07/26)
DobieStation Git (2020/07/26) is compiled. A young PS2 emulator with plans for an optimized Android port, as well as a fast, accurate, and easy-to-use PC port. A large portion of the PS2's library can boot or get to menus. Some titles can even go in-game, including high-profile ones such as Final Fantasy X and Shadow of the Colossus. Not intended for general use.
DuckStation Git (2020/07/26)
DuckStation Git (2020/07/26) is complied. Fast-ish PlayStation 1 emulator for PC and Android.
Fceux Git (2020/07/26)
Fceux Git (2020/07/26) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.
FB Neo Git (2020/07/26)
FB Neo Git (2020/07/26) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
puNES Git (2020/07/26)
puNES Git (2020/07//) is complied. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.
Stella Git (2020/07/26)
Stella Git (2020/07/26) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!
DOSBox-Staging Git (2020/07/26)
DOSBox-Staging Git (2020/07/26) is released. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.
BizHawk Git (2020/07/26)
BizHawk Git (2020/07/26) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
EmuTos CVS (2020/07/25)
EmuTos CVS (2020/07/25) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
WinVICE SVN r38229
WinVICE SVN r38229 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).
x360ce v4.11.13.0
x360ce v4.11.13.0 is released. Xbox 360 Controller Emulator (a wrapper library that translates the xinput calls to directinput calls) which allows your controller (GamePad, Joystick, Wheel, ...) to function like an Xbox 360 controller on a Windows PC. For example it allows you to play Grand Theft Auto (GTA) game with Logitech wheel.