yuzu Git (2020/07/13) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2020-07-13
yuzu Git (2020/07/13)
yuzu Git (2020/07/13) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2020/07/13)
Ryujinx Git (2020/07/13) is complied. Ryujinx is an open source Nintendo Switch Emulator written in C# created by gdkchan. This emulator aims at providing good performance and accuracy, a friendly interface, and consistent builds. Ryujinx is currently available for Windows, Linux, and macOS.
rpcs3 Git (2020/07/13)
rpcs3 Git (2020/07/13) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
PCSX2 Git (2020/07/13)
PCSX2 Git (2020/07/13) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.
DeSmuME Git (2020/07/13)
DeSmuME Git (2020/07/13) is compiled. DeSmuME is an open source Nintendo DS(NDS) emulator for Linux, Mac OS and Windows. DeSmuME supports save states, the ability to increase the size of the screen and it supports filters to improve image quality. DeSmuME also supports microphone use on Windows and Linux ports, as well as direct video and audio recording. The emulator also features a built-in movie recorder.
Vita3K Git (2020/07/13)
Vita3K Git (2020/07/13) is complied. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.
Xenia Git (2020/07/13)
Xenia Git (2020/07/13) is compiled. Xenia is an experimental emulator for the Xbox 360. It does not run games (yet).
XQEMU Git (2020/07/13)
XQEMU Git (2020/07/13) is compiled. XQEMU is a open source, cross-platform emulator for the original Xbox (and Sega Chihiro). It is currently in very early stages of development. XQEMU is built on-top of QEMU.
Flycast Git (2020/07/13)
Flycast Git (2020/07/13) is complied. Flycast is a multi-platform Sega Dreamcast, Naomi and Atomiswave emulator derived from reicast.
PPSSPP Git (2020/07/13)
PPSSPP Git (2020/07/13) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
Dolphin Git 5.0-12296
Dolphin Git 5.0-12296 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.
NanoBoyAdvance Git (2020/07/13)
NanoBoyAdvance Git (2020/07/13) is compiled. NanoboyAdvance is a Nintendo Game Boy Advance (TM) emulator written in C++17. The goal is to create a minimal, accurate and reasonably efficient Game Boy Advance emulator in modern C++. The emulator implements the core hardware completely and with high accuracy. Almost all games can be emulated without any known issues, even the 'Classic NES' titles which abuse a variety of edge-cases and undefined behaviour.
Fceux Git (2020/07/13)
Fceux Git (2020/07/13) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.
FB Neo Git (2020/07/13)
FB Neo Git (2020/07/13) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
DuckStation Git (2020/07/13)
DuckStation Git (2020/07/13) is complied. Fast-ish PlayStation 1 emulator for PC and Android.
DobieStation Git (2020/07/13)
DobieStation Git (2020/07/13) is compiled. A young PS2 emulator with plans for an optimized Android port, as well as a fast, accurate, and easy-to-use PC port. A large portion of the PS2's library can boot or get to menus. Some titles can even go in-game, including high-profile ones such as Final Fantasy X and Shadow of the Colossus. Not intended for general use.
puNES Git (2020/07/13)
puNES Git (2020/07/13) is complied. puNES is a NES emulator. Currently the program supports mappers 0, MMC1, UNROM, CNROM, and the sound is available. It uses the SDL libraries and it works on both Linux and Windows.
mGBA Git (2020/07/13)
mGBA Git (2020/07/13) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.
Caprice32 Git (2020/07/13)
Caprice32 Git (2020/07/13) is released. Caprice32 is an emulator of the Amstrad CPC 8bit home computer range. Caprice32 is a software emulator of the Amstrad CPC 8bit home computer series running on Linux and Windows. The emulator faithfully imitates the CPC464, CPC664, and CPC6128 models. By recreating the operations of all hardware components at a low level, the emulator achieves a high degree of compatibility with original CPC software. These programs or games can be run unmodified at real-time or higher speeds, depending on the emulator host environment.
DOSBox-Staging Git (2020/07/13)
DOSBox-Staging Git (2020/07/13) is released. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.
BizHawk Git (2020/07/13)
BizHawk Git (2020/07/13) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
QEMU v4.2.1
QEMU v4.2.1 is released. QEMU is a generic and open source machine emulator and virtualizer.When used as a machine emulator, QEMU can run OSes and programs made for one machine (e.g. an ARM board) on a different machine (e.g. your own PC). By using dynamic translation, it achieves very good performances.When used as a virtualizer, QEMU achieves near native performances by executing the guest code directly on the host CPU. A host driver called the QEMU accelerator (also known as KQEMU) is needed in this case. The virtualizer mode requires that both the host and guest machine use x86 compatible processors.
SimCoupe v1.1 alpha (2020/07/11)
SimCoupe v1.1 alpha (2020/07/11) is released. SimCoupe emulates the SAM Coupe - a Britsh Z80-based home computer released in 1989 by Miles Gordon Technology. See the Links section at the end of this document for more information, including history and technical specifications.
pfeMame v2.13.1
pfeMame v2.13.1 is released. pfeMame is a front end for the Multiple Arcade Game Emulator (MAME) written in Python. It is cross platform (tested on Linux - Ubuntu and Windows XP). It also includes a graphical Tile View designed for MAME cabinets which allows control using joystick / gamepad. pfeMame was written by Gareth Finch and started in 2014.
LaunchBox v11.2
LaunchBox v11.2 is released. LaunchBox is a portable, box-art-based games database and launcher for DOSBox, emulators, arcade cabinets, and PC Games.
ROM Properties v1.6.1
ROM Properties v1.6.1 is released. ROM Properties is a shell extension adding the ability to display additional information to file managers. ROM Properties is currently available for Linux and Windows. This shell extension adds a few nice features to file browsers for managing video game ROM and disc images.
PPSSPP v1.10.3
PPSSPP v1.10.3 is released. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
WinVICE SVN r38114
WinVICE SVN r38114 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).