yuzu Git (2020/02/18) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
2020-02-18
yuzu Git (2020/02/18)
yuzu Git (2020/02/18) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Ryujinx Git (2020/02/18)
Ryujinx Git (2020/02/18) is complied. Ryujinx is a Experimental Switch emulator written in C#. Don't expect much from this. Some homebrew apps works, and Tetris shows the intro logos (sometimes) but that's about it for now. Contributions are always welcome.
rpcs3 Git (2020/02/18)
rpcs3 Git (2020/02/18) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
Xenia Git (2020/02/18)
Xenia Git (2020/02/18) is compiled. Xenia is an experimental emulator for the Xbox 360. It does not run games (yet).
Vita3K Git (2020/02/18)
Vita3K Git (2020/02/18) is complied. Vita3K is an experimental PlayStation Vita emulator for Windows, Linux and macOS. The emulator currently runs a few homebrew programs in .vpk format. No commercial games are playable.
DobieStation Git (2020/02/18)
DobieStation Git (2020/02/18) is compiled. A young PS2 emulator with plans for an optimized Android port, as well as a fast, accurate, and easy-to-use PC port. A large portion of the PS2's library can boot or get to menus. Some titles can even go in-game, including high-profile ones such as Final Fantasy X and Shadow of the Colossus. Not intended for general use.
FB Neo Git (2020/02/18)
FB Neo Git (2020/02/18) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.
Dolphin Git 5.0-11673
Dolphin Git 5.0-11673 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.
PPSSPP Git (2020/02/18)
PPSSPP Git (2020/02/18) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
Snes9x ReRecording Git (2020/02/18)
Snes9x ReRecording Git (2020/02/18) is compiled. Snes9x ReRecording has three branches. These are Snes9x 1.43、Snes9x 1.51 and Snes9x 1.52 respectively. This is the development project for this branch of Snes9x. Its primary function is to expand features related to the creation of Tool-Asssisted movies.
Gens-ReRecording Split AVI
Gens-ReRecording Split AVI is released. Gens Rerecording, formerly known as Gens Movie Test, is a modification of the highly popular Gens emulator. This modification includes slowdown, recording and playback of controller input logs, dumping of AVI files, and Lua scripting. This emulator is primarily used by the Nesvideos community.
1964 - Carnivorous Edition (2020/02/17)
1964 - Carnivorous Edition (2020/02/17) is compiled. Unofficial fork of 1964. 1964 is a free Open Source N64 Emulator. It is one of the top Nintendo emulators arround that you can get with a high game compatibility rate.
FCE Ultra GX v3.4.5
FCE Ultra GX v3.4.5 is released. FCE Ultra GX is a modified port of the FCE Ultra 0.98.12 Nintendo Entertainment system for x86 (Windows/Linux) PC's. With it you can play NES games on your Wii/GameCube(NGC). Version 2 is a complete rewrite based on code from SNES9x GX.
Snes9x GX v4.4.6
Snes9x GX v4.4.6 is released. Snes9x GX is a Super Nintendo(SFC) emulator based on Snes9x, ported to the Wii and GameCube. The code is a continuation of Softdev and Crunchy2's efforts, and uses libogc and devkitppc.
DOSBox SVN r4329
DOSBox SVN r4329 is released. DOSBox emulates an Intel x86 PC, complete with sound, graphics, mouse, joystick, modem, etc., necessary for running many old MS-DOS games that simply cannot be run on modern PCs and operating systems, such as Microsoft Windows XP, Windows Vista, Linux and FreeBSD. However, it is not restricted to running only games. In theory, any MS-DOS or PC-DOS (referred to commonly as "DOS") application should run in DOSBox, but the emphasis has been on getting DOS games to run smoothly, which means that communication, networking and printer support are still in early development.
DOSBox-Staging Git (2020/02/18)
DOSBox-Staging Git (2020/02/18) is released. This repository attempts to modernize the DOSBox project by using current development practices and tools, fixing issues, adding features that better support today's systems, and sending patches upstream.
Swiss r785
Swiss r785 is released. The swiss army knife of gamecube homebrew. Swiss aims to be the ultimate utility Gamecube homebrew application.
mGBA Git (2020/02/18)
mGBA Git (2020/02/18) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.
GBARunner2 Git (2020/02/17)
GBARunner2 Git (2020/02/17) is complied. GBARunner2 ia a GBA hypervisor for DS. By default GBARunner2 will look for a "GBA" folder in the root oft the SD card, and open it. Otherwise, it will open the root of SD card. Put roms and a gba bios as "bios.bin" in the "GBA" folder or the root of your sd card. Make sure the roms are sram patched if needed. Hidden or system files and folder won't be shown, so "bios.bin" file can be hidden.
BizHawk Git (2020/02/18)
BizHawk Git (2020/02/18) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
Nostlan v1.7.3
Nostlan v1.7.3 is released. Nostlan is a high quality front-end launcher for video game emulators! Available on Linux, macOS, and Windows! A front-end or user interface (UI) is the presentation and interaction layer of an app or website. Most modern emulator apps have basic game list UIs that you can interact with using a mouse/keyboard but not a game controller. Nostlan looks similar to media viewers like Kaleidescape and AppleTV. You can interact with it using a mouse or game controller. Unlike other popular front-end launchers for video game emulators, Nostlan has a minimalistic design that prioritizes box art, not metadata.
BletchMAME v1.8
BletchMAME v1.8 is released. BletchMAME is a new experimental front end for MAME. Unlike existing front ends (which function as launchers, keeping MAME's internal UI), BletchMAME replaces the internal MAME UI with a more conventional point and click GUI to provide a friendlier experience in a number of areas (such as profiles, input configuration and a number of others). While BletchMAME is intended to support all machines supported by MAME, it should be particularly suitable to computer emulation.
GameEx v16.26
GameEx v16.26 is released. GameEx is a graphical DirectX based front-end for MAME, Zinc, Daphne, PC Games, and all command line based game emulators, along with being a good Home Theatre PC solution. It also makes a good CarPC and touchscreen frontend. The original goal was for it to be used on Windows XP Media Center and Arcade Cabinets although it will run on any version of Windows 98, ME, 2000, XP and Vista. For just $17 (USD) you can too unlock the full potential of the front end.
Dapplegrey v7.4.2
Dapplegrey v7.4.2 is released. Dapplegrey is a frontend for the MacOS X DOSBox port (which you can get from the official DOSBox website) written in REALbasic. Not only the plain DOSBox app, but DOSBox versions included in DBGL or Boxer will also be recognized as DOSBox binary source. With Dapplegrey you can easily set options the DOSBox gives to you w/o having to enter them manually using the Terminal or have to edit the DOSBox config file. This file will be written before Dapplegrey tells DOSBox to start the DOS game.
Common Source Code Project (2020/02/17)
Common Source Code Project (2020/02/17) is released. This is the common source code archive of my works:
JavaCPC Desktop v2.9.8f
JavaCPC Desktop v2.9.8f is released. JavaCPC Desktop is a brand new Amstrad CPC emulator. It is based on JEMU and is an extremely improved release from JavaCPC 6.7. JavaCPC Desktop is designed to be used on Windows systems only, but maybe can run also on other systems, but a few features will be missing then.
EmuTos CVS (2020/02/16)
EmuTos CVS (2020/02/16) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
WinVICE SVN r37479
WinVICE SVN r37479 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).
