rpcs3 Git (2019/12/16)

rpcs3 Git (2019/12/16) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

yuzu Git (2019/12/16)

yuzu Git (2019/12/16) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from sharead improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Citra Git (2019/12/16)

Citra Git (2019/12/16) is released. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.

Fceux Git (2019/12/16)

Fceux Git (2019/12/16) is compiled. FCEUX is a cross platform, NTSC and PAL Famicom/NES emulator that is an evolution of the original FCE Ultra emulator. Over time FCE Ultra had separated into many separate branches. The concept behind FCEUX is to merge elements from FCE Ultra, FCEU rerecording, FCEUXD, FCEUXDSP, and FCEU-mm into a single branch of FCEU. As the X implies, it is an all-encompassing FCEU emulator that gives the best of all worlds for the general player, the ROM-hacking community, and the Tool-Assisted Speedrun Community.

Dolphin Git 5.0-11384

Dolphin Git 5.0-11384 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

FB Neo Git (2019/12/16)

FB Neo Git (2019/12/16) is complied. FinalBurn Neo is an Emulator for Arcade Games & Select Consoles. It is based on the emulators FinalBurn and old versions of MAME.

BizHawk Git (2019/12/16)

BizHawk Git (2019/12/16) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

My Nes GTK v3.3.490

My Nes GTK v3.3.490 is released. My Nes GTK is a nes emuator written in .net C#. It can run an Windows(R) and Linux platforms. It uses GTK# for menus, SDL.NET for emulator window.

Stella Git (2019/12/16)

Stella Git (2019/12/16) is compiled. Stella is a multi-platform Atari 2600 VCS emulator. The Atari 2600 Video Computer System (VCS), introduced in 1977, was the most popular home video game system of the early 1980's. Now you can enjoy all of your favorite Atari 2600 games on your PC thanks to Stella!

GameEx v16.10

GameEx v16.10 is released. GameEx is a graphical DirectX based front-end for MAME, Zinc, Daphne, PC Games, and all command line based game emulators, along with being a good Home Theatre PC solution. It also makes a good CarPC and touchscreen frontend. The original goal was for it to be used on Windows XP Media Center and Arcade Cabinets although it will run on any version of Windows 98, ME, 2000, XP and Vista. For just $17 (USD) you can too unlock the full potential of the front end.

WinUAE v4.3.0 Beta 9

WinUAE v4.3.0 Beta 9 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

WinArcadia & AmiArcadia v26

WinArcadia & AmiArcadia v26 are released. AmiArcadia and WinArcadia are multi-emulators of these Signetics-based machines: Emerson Arcadia 2001 console family (Bandai, Emerson, Grandstand, Intervision, Leisure-Vision, Leonardo, MPT-03, Ormatu, Palladium, Poppy, Robdajet, Tele-Fever, Tempest, Tryom, Tunix, etc.) (1982);Interton VC 4000 console family (Acetronic, Fountain, Interton, Prinztronic, Radofin, Rowtron, Voltmace, Waddington, etc.) (c. 1978);Elektor TV Games Computer (1979); PIPBUG-based machines (Electronics Australia 77up2 and 78up5, Signetics Adaptable Board Computer, Eurocard 2650, etc.) (c. 1977-1978);Signetics Instructor 50 trainer (1978);Central Data 2650 computer (1977);Malzak 1 and 2 coin-ops by Kitronix (c. 1980) (preliminary); and Galaxia and Astro Wars coin-ops by Zaccaria (1979-1980) (preliminary).

pfeMame v2.11.4

pfeMame v2.11.4 is released. pfeMame is a front end for the Multiple Arcade Game Emulator (MAME) written in Python. It is cross platform (tested on Linux - Ubuntu and Windows XP). It also includes a graphical Tile View designed for MAME cabinets which allows control using joystick / gamepad. pfeMame was written by Gareth Finch and started in 2014.

VICE v3.1.cloanto8

VICE v3.1.cloanto8 is released. VICE is a program that runs on a Unix, MS-DOS, Win32, OS/2, Acorn RISC OS, BeOS, QNX 4.x, QNX 6.x, Amiga, GP2X, SkyOS or Mac OS X machine and executes programs intended for the old 8-bit computers. The current version emulates the C64, the C64DTV, the C128, the VIC20, almost all PET models, the PLUS4 and the CBM-II (aka C610).

JavaCPC Desktop v2.9.8b

JavaCPC Desktop v2.9.8b is released. JavaCPC Desktop is a brand new Amstrad CPC emulator. It is based on JEMU and is an extremely improved release from JavaCPC 6.7. JavaCPC Desktop is designed to be used on Windows systems only, but maybe can run also on other systems, but a few features will be missing then.

RomVault v3.0.44

RomVault v3.0.44 is released. RomVault is a new rom management tool. RomVault should be seen as an alternative to clrmame pro with some nice and new features that could make it perfect for managing large numbers of dats / collections using less time (one scan vs N dats a time instead of one scan for each dat) and giving you a nice easy to use GUI.

WinVICE SVN r37278

WinVICE SVN r37278 is released. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).

EmuTos CVS (2019/12/15)

EmuTos CVS (2019/12/15) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.

Wine v5.0-rc1

Wine v5.0-rc1 is released. Wine is a project to allow a PC running a Unix-like operating system and the X Window System to run x86 programs for Microsoft Windows. Alternately, those wishing to port a Windows application to a Unix-like system can compile it against the Wine libraries.

CEMU Graphic Packs v564

CEMU Graphic Packs v564 is released. It is a Community Graphic Packs for Cemu. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC.