2018-10-26
Citra Git (2018/10/26)
Citra Git (2018/10/26) is released. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.
DeSmuME Git (2018/10/26)
DeSmuME Git (2018/10/26) is compiled. DeSmuME is an open source Nintendo DS(NDS) emulator for Linux, Mac OS and Windows. DeSmuME supports save states, the ability to increase the size of the screen and it supports filters to improve image quality. DeSmuME also supports microphone use on Windows and Linux ports, as well as direct video and audio recording. The emulator also features a built-in movie recorder.
Ryujinx Git (2018/10/26)
Ryujinx Git (2018/10/26) is complied. Ryujinx is a Experimental Switch emulator written in C#. Don't expect much from this. Some homebrew apps works, and Tetris shows the intro logos (sometimes) but that's about it for now. Contributions are always welcome.
yuzu Git (2018/10/26)
yuzu Git (2018/10/26) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from shared improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
Dolphin Git 5.0-8939
Dolphin Git 5.0-8939 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.
PPSSPP Git (2018/10/26)
PPSSPP Git (2018/10/26) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
OpenMSX Git (2018/10/26)
OpenMSX Git (2018/10/26) is complie. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.
BizHawk Git (2018/10/26)
BizHawk Git (2018/10/26) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
RPCemu v0.9.1
RPCemu v0.9.1 is released. RPCEmu is the continued development of the popular Acorn machine emulator by Tom Walker. It emulates an Acorn RiscPC and A7000.
EmuTos CVS (2018/10/26)
EmuTos CVS (2018/10/26) is released. EmuTos is a GEMDOS compatible operating system for Atari ST series computers. It is made from Digital Research's GPLed original sources and is a free and open source replacement for common TOS images for Atari ST emulators.
rpcs3 Git (2018/10/25)
rpcs3 Git (2018/10/25) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.
Citra Git (2018/10/25)
Citra Git (2018/10/25) is released. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.
Xenia Git (2018/10/25)
Xenia Git (2018/10/25) is compiled. Xenia is an experimental emulator for the Xbox 360. It does not run games (yet).
DeSmuME Git (2018/10/25)
DeSmuME Git (2018/10/25) is compiled. DeSmuME is an open source Nintendo DS(NDS) emulator for Linux, Mac OS and Windows. DeSmuME supports save states, the ability to increase the size of the screen and it supports filters to improve image quality. DeSmuME also supports microphone use on Windows and Linux ports, as well as direct video and audio recording. The emulator also features a built-in movie recorder.
Ryujinx Git (2018/10/25)
Ryujinx Git (2018/10/25) is complied. Ryujinx is a Experimental Switch emulator written in C#. Don't expect much from this. Some homebrew apps works, and Tetris shows the intro logos (sometimes) but that's about it for now. Contributions are always welcome.
PCSX2 Git (2018/10/25)
PCSX2 Git (2018/10/25) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.
yuzu Git (2018/10/25)
yuzu Git (2018/10/25) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from shared improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.
bsnes-plus Git (2018/10/25)
bsnes-plus Git (2018/10/25) is complied. bsnes-plus (or bsnes+) is a fork of bsnes (based on bsnes-classic) intended to introduce some new features and improvements, mostly aimed at debugging. bsnes is an emulator for the Super Famicom and SNES video game systems. The purpose of the emulator is a bit different from other emulators: it focuses on accuracy, debugging functionality, and clean code.
Snes9x Git (2018/10/25)
Snes9x Git (2018/10/25) is compiled. Snes9x is a portable, freeware Super Nintendo Entertainment System (SNES) emulator. It basically allows you to play most games designed for the SNES and Super Famicom Nintendo game systems on your PC or Workstation; which includes some real gems that were only ever released in Japan. Snes9x is the result of well over three years worth of part-time hacking, coding, recoding, debugging, divorce, etc. (just kidding about the divorce bit). Snes9x is coded in C++, with three assembler CPU emulation cores on the i386 Linux and Windows ports.
Reicast Git (2018/10/25)
Reicast Git (2018/10/25) is compiled. reicast is a multi-platform Dreamcast emulator. The project is currently in Alpha, usability, performance and stability issues are to be expected. Cortex-A9 dualcore, 1ghz+ is the minimum hardware for decent speeds.
Dolphin Git 5.0-8937
Dolphin Git 5.0-8937 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.
PPSSPP Git (2018/10/25)
PPSSPP Git (2018/10/25) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.
Play! Git (2018/10/25)
Play! Git (2018/10/25) is complied. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.
BizHawk Git (2018/10/25)
BizHawk Git (2018/10/25) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.
WinVICE SVN r35698
WinVICE SVN r35698 is compiled. WinVICE is a program that executes programs intended for the old 8-bit computers. The current version emulates the C64, the C128, the VIC20, all the PET models (except the SuperPET 9000, which is out of line anyway), the PLUS4 and the CBM-II (aka C610).
CEMU Graphic Packs v100
CEMU Graphic Packs v100 is released. It is a Community Graphic Packs for Cemu. Cemu is a Nintendo Wii U emulator that runs commercial games. Highly experimental software to emulate Wii U applications on PC.
OpenMSX Git (2018/10/25)
OpenMSX Git (2018/10/25) is complie. OpenMSX is an open source MSX emulator which is free according to the Debian Free Software Guidelines, available under the GNU General Public License.For copyright reasons the emulator cannot be distributed with original BIOS ROM images. OpenMSX includes C-BIOS a minimal implementation of the MSX BIOS, allowing to play quite some games without the need to have an original MSX BIOS ROM image. You can also use your own BIOS ROM image if you please.
NPlayers.ini v0.202
NPlayers.ini v0.202 is released. NPlayers.ini fills the "Players" column of your favourite MAME / SDLMAME frontend letting you know how many players the game supports and if it's simultaneous play or not. You'll find more info in the text file included in the zip archive.