PCSX2 Git (2018/09/28)

PCSX2 Git (2018/09/28) is compiled. PCSX2 is an open source PlayStation 2 (PS2) emulator for the Microsoft Windows and Linux operating systems. With the most recent versions, many PS2 games are playable (although speed limitations have made play-to-completion tests for many games impractical), and several games are claimed to have full functionality.

rpcs3 Git (2018/09/28)

rpcs3 Git (2018/09/28) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

Citra Git (2018/09/28)

Citra Git (2018/09/28) is released. This is the trunk of Citra Project. Citra is an experimental open-source Nintendo 3DS emulator/debugger written in C++. At this time, it only emulates a very small subset of 3DS hardware, and therefore is only useful for booting/debugging very simple homebrew demos. Citra is licensed under the GPLv2. Refer to the license.txt file included.

Ryujinx Git (2018/09/28)

Ryujinx Git (2018/09/28) is complied. Ryujinx is a Experimental Switch emulator written in C#. Don't expect much from this. Some homebrew apps works, and Tetris shows the intro logos (sometimes) but that's about it for now. Contributions are always welcome.

yuzu Git (2018/09/28)

yuzu Git (2018/09/28) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from shared improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

Snes9x Git (2018/09/28)

Snes9x Git (2018/09/28) is compiled. Snes9x is a portable, freeware Super Nintendo Entertainment System (SNES) emulator. It basically allows you to play most games designed for the SNES and Super Famicom Nintendo game systems on your PC or Workstation; which includes some real gems that were only ever released in Japan. Snes9x is the result of well over three years worth of part-time hacking, coding, recoding, debugging, divorce, etc. (just kidding about the divorce bit). Snes9x is coded in C++, with three assembler CPU emulation cores on the i386 Linux and Windows ports.

Reicast Git (2018/09/28)

Reicast Git (2018/09/28) is compiled. reicast is a multi-platform Dreamcast emulator. The project is currently in Alpha, usability, performance and stability issues are to be expected. Cortex-A9 dualcore, 1ghz+ is the minimum hardware for decent speeds.

GLideN64 Git (2018/09/28)

GLideN64 Git (2018/09/28) is compiled. GLideN64 is a new generation, open-source graphics plugin for N64 emulators

Dolphin Git 5.0-8768

Dolphin Git 5.0-8768 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

PPSSPP Git (2018/09/28)

PPSSPP Git (2018/09/28) is compiled. PPSSPP is a fast and portable PSP emulator for Android, Windows, Mac, and Linux, written in C++.

DOSBox SVN r4164

DOSBox SVN r4164 is released. DOSBox emulates an Intel x86 PC, complete with sound, graphics, mouse, joystick, modem, etc., necessary for running many old MS-DOS games that simply cannot be run on modern PCs and operating systems, such as Microsoft Windows XP, Windows Vista, Linux and FreeBSD. However, it is not restricted to running only games. In theory, any MS-DOS or PC-DOS (referred to commonly as "DOS") application should run in DOSBox, but the emphasis has been on getting DOS games to run smoothly, which means that communication, networking and printer support are still in early development.

BizHawk Git (2018/09/28)

BizHawk Git (2018/09/28) is compiled. BizHawk is a A multi-system emulator written in C#. BizHawk provides nice features for casual gamers such as full screen, and joypad support in addition to full rerecording and debugging tools for all system cores.

Emma 02 v1.27

Emma 02 v1.27 is released. Emma 02 is an emulator for the relatively unknown COMX-35 computers from the early 80s. Emma 02 runs on Windows XP, Vista and Windows 7.

MameUI64 v0.202

MameUI64 v0.202 is released. MameUI [formerly Mame32] is the GUI version of the Multiple Arcade Machine Emulator, a program which seeks to document the internal hardware and code of all arcade games. Originally authored in 1997 by Chris Kirmse, it was the first port of Mame™ to the Windows platform.

MAME v0.202 for Slackware

MAME v0.202 for Slackware is released. These are MAME (and tools) packages for Slackware Linux (32-bit and 64-bit editions). MAME stands for Multiple Arcade Machine Emulator.

rpcs3 Git (2018/09/27)

rpcs3 Git (2018/09/27) is compiled. RPCS3 is an open-source Sony PlayStation 3 emulator and debugger written in C++ for Windows and Linux. The emulator has been in development since early 2011 and currently supports modern DirectX 12, Vulkan and OpenGL renderers. The emulator is capable of booting and playing a decent amount of commercial games and PlayStation 3 SDK samples. Many more titles are also becoming playable with future development by contributors.

Ryujinx Git (2018/09/27)

Ryujinx Git (2018/09/27) is complied. Ryujinx is a Experimental Switch emulator written in C#. Don't expect much from this. Some homebrew apps works, and Tetris shows the intro logos (sometimes) but that's about it for now. Contributions are always welcome.

yuzu Git (2018/09/27)

yuzu Git (2018/09/27) is complied. yuzu is a work-in-progress Nintendo Switch emulator. yuzu is an open-source project, licensed under the GPLv2 (or any later version). yuzu has been designed with portability in mind, with builds available for Windows, Linux, and macOS. The project was started in spring of 2017 by bunnei, one of the original authors of the popular Citra 3DS emulator, to experiment with and research the Nintendo Switch. Due to the similarities between Switch and 3DS, yuzu was developed as a fork of Citra. This means that it uses the same project architecture, and both emulators benefit from shared improvements. During the early months of development, work was done in private, and progress was slow. However, as Switch reverse-engineering and homebrew development became popular, work on yuzu began to take off as well.

XQEMU Git (2018/09/27)

XQEMU Git (2018/09/27) is compiled. XQEMU is a open source, cross-platform emulator for the original Xbox (and Sega Chihiro). It is currently in very early stages of development. XQEMU is built on-top of QEMU.

Reicast Git (2018/09/27)

Reicast Git (2018/09/27) is compiled. reicast is a multi-platform Dreamcast emulator. The project is currently in Alpha, usability, performance and stability issues are to be expected. Cortex-A9 dualcore, 1ghz+ is the minimum hardware for decent speeds.

Play! Git (2018/09/27)

Play! Git (2018/09/27) is complied. Play! is an attempt at creating an emulator for the PlayStation 2 (PS2) console on the Windows platform. It is currently written in C/C++. It uses an instruction caching/recompilation scheme to achieve better performance while emulating the CPU.

NegaMAME v0.202.1

NegaMAME v0.202.1 is released. NNegatron is a MAME dedicated front-end that has then been engineered to ease the task for users and be as intuitive as possible. On its first release in November 2015, it was the very first front-end to fully unlock the possibilities of machine configurations available in MAME. Some other front-ends caught up since. But when MAME changed its way to provide information to third-party front-ends in May 2017 with v0.186, it also prevented access to some important information to front-ends. In June 2018, Negatron has once again reiterated its prowess by working in association with the new MAME derivative called NegaMAME. NegaMAME behaves exactly like official MAME. But it simply adds a command that third-party front-ends can use to get back the information missing in MAME since v0.186, effectively helping Negatron to regain full access to all the features it already had in 2015.

MameUI v0.202

MameUI v0.202 is released. MameUI [formerly Mame32] is the GUI version of the Multiple Arcade Machine Emulator, a program which seeks to document the internal hardware and code of all arcade games. Originally authored in 1997 by Chris Kirmse, it was the first port of Mame™ to the Windows platform.

HBMAME v0.202

HBMAME v0.201 is released. HBMAME (HomeBrew MAME) is a derivate of MAME, and contains various hacks and homebrews that are not included in MAME. It is based on the latest MAME source from SVN at the time of release.

WolfMame v0.202

WolfMame v0.202 is released. WolfMAME is a build which is optomised for MARP - MAME Action Replay Page, where literally thousands of MAME fans play, save and upload highscore attempts. WolfMAME does not allow the player to pause games, use cheats, change DIP switches etc to gain an unfair advantage.

ARCADE v0.202

ARCADE v0.202 is released. ARCADE is a derivative unofficial build based on the MAMEUIFX source code. MAMEUIFX has more improvements over regular MAME.

Dolphin Git 5.0-8757

Dolphin Git 5.0-8757 is compiled. This is the trunk of Dolphin Project. Dolphin is the first Gamecube emulator able to run commercial games! Dolphin is a Gamecube, Wii and Triforce (the arcade machine based on the Gamecube) emulator which supports many extra features and abilities not present on the original consoles. It has a partial Wii support and plays most Gamecube games.

mGBA Git (2018/09/27)

mGBA Git (2018/09/27) is compiled. mGBA is a new emulator for running Game Boy Advance games. It aims to be faster and more accurate than many existing Game Boy Advance emulators, as well as adding features that other emulators lack.