AppleWin v1.26.3.5 is released. AppleWin (also known as Apple //e Emulator for Windows) is an open source software emulator for running Apple II programs in Microsoft Windows. AppleWin has support for most programs that could run either on the Apple II+ or the Apple IIe. By default, AppleWin emulates the Extended Keyboard IIe (better known as the Platinum IIe) with built-in 80-column text support, 128 kilobytes of RAM, two 5.25-inch floppy disk drives, a joystick, a serial card and 65C02 CPU. AppleWin supports lo-res, hi-res, and double hi-res graphics modes and can emulate both color and monochrome Apple II monitors; later versions of AppleWin also can emulate a television set used as a monitor. Both 40-column and 80-column text is supported.

AppleWin can emulate the Apple II joystick (using the PC's default controller), paddle controllers (using the computer mouse), and can also emulate the Apple II joystick using the PC keyboard. AppleWin can also use the PC speaker to emulate the Apple II's sound if no sound card is available (does not work under NT-based Windows versions). Full screen mode is available through the use of DirectX. Features added to the latest versions of AppleWin include Ethernet support using Uthernet, Mockingboard and Phasor sound card support, SSI263 speech synthesis, hard drive disk images and save states.

AppleWin v1.26.3.5 Changelog:
Changes:
[Bug #504] Full-screen: hide mouse pointer after 2 seconds of inactivity (and show again if mouse is moved)
[Bug #469] New -no-printscreen-key switch to prevent the PrintScreen key from being registered.
[Bug #488] New -fs-height= switch to select a better resolution for full-screen mode.
best: picks the highest resolution where the height is an integer multiple of (192*2)
nnnn: select a specific resolution with height=nnnn pixels
NB. This switch changes the display resolution (and restores it on exit).
[Bug #428] Input option to use PC Joystick 1 Thumbstick 2 for emulated Joystick 2
Swapping disks while a drive is on now warns and prompts if you still wish to do this instead of silently failing with no feedback.
[Bug #323] Skip hard disk boot by holding down the Open-Apple key during an Apple II restart
[Bug #224] Added Config checkbox for 'Full-Screen: Show drive/keyboard status'
[PR #441] Update zlib to latest version 1.2.11

Fixes:
[Bug #516] Internal video-mode was having PAGE2 permanently cleared (instead of just masked) when 80STORE was set.
[Bug #514] Emulator restart (or reset) wasn't clearing any pending Mousecard interrupt
[Bug #499] Flush current track (if dirty) before 'Send to CiderPress'
[Bug #496] Support polling of Mockingboard's & Phasor's 6522 IFR.Timer1
[Bug #492] UI fixes for full-screen & 2x windowed-mode
[Bug #486] Peripheral card's expansion ROM ($C800-CFFF, eg. SSC) wasn't being correctly restored from a save-state
Resulting in regression: Mousecard crash to monitor (#495).
[Bug #464] Fix for full-screen: bottom line missing when vertical resolution is 768
[Bug #460] Debugger: F2 whilst debugger active will immediately stop the drive spinning (allowing disk swap)
[Bug #456] Fix strange speaker clicks when changing configuration - DirectSound wasn't being uninitialised on a restart
[Bug #452] Fix for unmounted HD now gives "NO DEVICE CONNECTED" (before gave "I/O ERROR")
[Bug #450] Persist debugger state across an F2 (reset machine state)
[Bug #445] Debugger: BPM cmd: Support trigger on stack access for BRK,JSR,PLn,PHn,RTI,RTS
[Bug #437] AppleWin.chm blocked from opening - delete the AppleWin.chm:Zone.Identifier ADS
[Bug #423] Full support for INTC8ROM soft switch (fixes transient a2audit.dsk & Bejeweled failures)
[Bug #418] Fix for slot-3 ROM not returning floating bus when Uthernet card is enabled
[Bug #417] Typos in Uthernet documentation
[Bug #415] Fix for not being able to select Pravets 82
[Bug #413] Save-state: bug when saving >9 RAMWorks III 64K banks
[Bug #409] Fix for AppleWorks 5.1 flickering when booting (latent bug from 2006!)
[Bug #405] Screen flicker in full-speed mode
[Bug #403] PrintScreen from Color TV or B&W TV video modes is missing top line
[Bug #392] Fixes for a2audit.dsk
Resulting in regressions in LC support for Gemstone Warriors (#395), Quark Catalyst V3 and BeagleWrite (#400).
[Bug #389] Disk's write-protect detection mis-reporting when motor off
[Bug #387] Support for 40-track .nib files
[Bug #386] SSC:
Experimental support for 6551's DTR, DCD and DSR bits via -modem switch
ie. -modem is shorthand for passing -dtr -dcd -dsr
Experimental support for 6551's control bit: DTR via -dtr switch
Experimental support for 6551's status bits: DCD and DSR via -dcd and -dsr switches
[Bug #383] "Enhanced disk speed" is very slow when debugger is active
[Bug #320] Mockingboard/Phasor: support 'inactive' function like real hardware
[Bug #269] When stepping, ESC no longer exits back to debugger (use F7, Pause keys or Debugger button instead).
[Bug #250] Debugger: When MODE_STEPPING, fix issue with disk LEDs staying on
[Bug #217] Debugger G(o) command should use normal speed
Debugger: Added new gg command:
command run at normal speed run at full speed video quality sound quality
g yes only if disk active, etc precise precise
gg no always periodic muted
[Bug #213] Pause not setting volume to zero

Download: AppleWin v1.26.3.5
Source: Here