Neko Project 21/W v0.86 Rev. 36 is released. Neko Project II is a port to the Wii of NP2 (Neko Project II), NEC PC-9801 emulator, programmed by Yui.

Neko Project 21/W v0.86 Rev. 36 Changelog:
Fix around BEEP PCM
-Fixed the problem that the DA playback is wrong when the sampling rate is changed.
DirectDraw emulation settings are not effective.
-Fixed a problem that may not be able to boot with FD image in d88 format
-118 sound source and Mate-x PCM are now available in Windows.
• The driver must manually enter the ymf701 compatible sound System (Win95) etc.
If you choose 118 or Mate-x PCM alone, you will be Dma3, INT5 (IRQ12)
・ 86 instrument + mate-x PCM (B460) If selected, DMA1, INT0 (IRQ3)
Mate-x PCM (B460) should be rewritten to B460 the driver inf when used with win because Soundid is moving to B460 by default
OPL3 FM sound is almost okay (however, the tone will be wrong with resume and state save)
Cs4231 is played in its own way for a long time.
If you play for a long time, the noise begins to enter.
I have not tested the win.
cs4231 No-basis code was replaced with the basis of code
-Volume adjustment is implemented (you can adjust the volume of wave and FM from win, etc.)
-Fixed a malfunction of the board setting when switching from other sources to 118 sources.
Sound Blaster 16 has been added
It was separated from the 118 sound source.
Added the ability to enable/disable the IDE BIOS automatically
Check the IDE option Auto IDE BIOS to enable the feature
Number of heads 8, sector number 17 If the disk image is not connected, the IDE BIOS will be disabled automatically.
-Number of heads 8, sector number 17 But there seems to be a case which does not start, but I do not know the cause for now, please disable it manually

Download: Neko Project 21/W v0.86 Rev. 36
Source:Here