WinUAE v3.2.0 Beta 11

WinUAE v3.2.0 Beta 11 is released. WinUAE is the commodore amiga emulator for Windows. WinUAE is a mostly complete software emulation of the hardware of the Commodore Amiga 500/1000/2000. A Commodore Amiga, for those who don’t know, is a 16/32 bit computer system based on the Motorola 680×0 CPU and a few specially designed custom chips that provide very good graphics and sound capabilities. Its first incarnation, the A1000, appeared in 1985, followed by the highly successful A500 and A2000 models. WinUAE is a port of the originally written for Unixish systems UAE; but over time, it seems the Windows port, WinUAE has become the best version available on any platform. WinUAE is free software: you are welcome to distribute copies of it and/or modify it, under certain conditions. There is no warranty of any kind for UAE. For more details concerning these issues, please read the GNU General Public License, which describes the terms under which WinUAE is distributed.

WinUAE v3.2.0 Beta 11 Changelog:

- Fixed A2386SX default video mode configuration, it is software controlled, not jumper like in older models. Fixes unexpected "Invalid configuration information" BIOS messages. - Added A2386SX-only hack to enable working 1.4M floppy images, I assume it thinks connected drive is Amiga 1760k drive and it programs FDC to use 720k (1.4M half speed) bit rate. - Autodetect *.ima PC disk images inside archives. - Increased IDE emulation multiple transfer support from 64 blocks to 128 blocks (Max possible). - Universal XTIDE BIOS load address is now user configurable. (Exxxx does not work in AT systems) - x86 IDE emulation used wrong byte swapping mode if data port width was 16/32-bit (AT systems) - Added support for IDE emulation edge triggered interrupts. ISA bus uses edge triggered interrupts, Fixes A2386SX IDE configuration hang. - Only first non-autoconfig "board" was initialized if more than one was configured (for example both x86 AT IDE and XT IDE controller was enabled) - Write-protect 0xDC000 region from Amiga-side writes if it is used by XTIDE Universal BIOS. This address conflicts with Amiga-PC shared memory space but fortunately it seems only beginning of this space is actually used for Amiga-PC communication. - XTIDE Universal BIOS hardware is now correctly emulated. - Per-monitor high DPI update caused repeated GUI re-open in some situations. - DOSBox CPU modes now use DOSBox hardware timer emulation, fixes A2386SX floppy access delays. - Added all currently available bridgeboard BIOS ROMs to ROM scanner. - Cleaned up internal expansion ROM selection code. NOTE: Nearly all previously created DOS HD images are not supported anymore due to wrong byte swapping. They need to be created from scratch.

Download: WinUAE v3.2.0 Beta 11
Source: Here